Friday 27 March 2015

IDF Shot Kal work in progress from Balazs Kobolak

Hello All!

Today I would like to show something different. No, it's not a figure :) My friend Balazs Kobolak  asked me to show you his new build project of a Shot Kal the IDF vehicle. Basically this is a modified British Centurion.
Balazs used Voyager P.E. and Friul for track. The canvas of the gun made from tissue. He already finished with painting, so coming soon the final photos as well, but he wanted to inform you some info about how he made it. So let's see first the work in progress photos.

Hello Mindenki!

Ma egy finomsággal készültem. Kobolák Balázs barátom kért meg rá, hogy rakjak fel pár képet a Shot Kal típusú, az Izraeli Védelmi Erőnél szolgálatot teljesített harcjárművéről. Ezek a járművek, erősen átalakított angol Centurion típusú kocsik voltak.
Balázs a Voyager maratását használta, illetve a Friul szemenkénti fém lánctalpát. A ponyva a lövegcsőre zsebkendőből készült. A harckocsi már le van festve, teljesen elkészült. Azonban még Balázs épp cikket ír hozzá, hogy mit hogyan is festett, így arra egy picit még várni kell. No de jöjjenek az építési képek.
















Coming back soon!
Cheers
Gergo

Wednesday 18 March 2015

90%

Hello there!

I should say I'm ready at 90% In the last few days I was working on the track, and the front/back armor. Not many things left. Only like a bit tone for mud on wheels, give a bit shine for it, a bit dust on the top of the roof and finish exhaust. After that only equipments and figures. I hope you like it!


Helló!

Azt kell mondjam 90% ban készen van a kicsike. Az elmúlt pár napban a lánctalpon dolgoztam, illetve a első/hátsó páncél lemezeken. Nem sok dolog maradt hátra, csupán játszani egy kicsit a tónusokkal a kerekeken, illetve befejezni a tetőlemezt. Ezek után már csak a felszerelések és a figurák vannak hátra és már kész is vagyunk. Remélem azért tetszik nektek is.






Sunday 15 March 2015

still working on mud, but.....

Hi all!

just a few word today. I'm still working on the mud, but during the main time, I finished the streaking on side. Also almost finished on track, but will follow more tones on it. Until the paint are getting dry, I will start the weathering on turret.

Helló mindenki!

Csak egy gyors helyzetjelentés, mert még mindig a sáron dolgozom. De ekközben befejeztem a megfolyásokat az oldalán, illetve majdnem kész a lánctalp is, de kell még egy két tónus ide meg oda. Addig is míg a festékek száradnak, ma a toronnyal fogok foglalkozni.








Thanks for watching, coming back soon with turret photos!

Cheers
Gergo

Tuesday 10 March 2015

start with mud and streaking effects.

Hello dear readers!

Since my painting method finished, I did not post here. I finished with pin washing, use the AK fluid. IMO that is good, the colour is deep enough but I think a bit too lumpy. However I could play with it. But first of all, I had to fix a problem. My friend Roman Volchenkov payed my attention to the nose of the hull which is an angle on original, but I made as the Tamiya make it as round.I fixed this problem with A+B putty.


Helló kedves olvasó!

Amióta a festéssel végeztem, nem posztoltam ide. Most megteszem. Végeztem a körbefuttatással. Ehhez az AK folyadékját használtam. Szerény véleményem szerint túl darabos, legközelebb már nem is ezt használom, azonban még most jó volt. Ki kellett javítanom egy hibámat. Barátom Roman Volchenkov hívta fel rá a figyelmem, hogy ez a típus szögletes orral készült nem oválissal. Ezt A+B puttyval oldottam meg.



After that I could apply the chipping, use my friend's Vallejo paint. Thanks for it to Milan Tusai!

Ezután elkészítettem a lepattogzódásokat. A festékért köszönet Tusai Milán barátomnak!







When this phase was ready I could start the base of the mud. I used Humbrol 72 as base colour, what I mixed with crumbled resin. When it was on the wheels I put from brush pigments on it. ut this is only a base I will use oil paints to finish the mud. Give life to it!

Ezek után már nekikezdhettem a sár alapjának, amihez Humbrol 72 festéket és műgyanta reszeléket használtam. A sár nincs még készen még különböző árnyalatokkal fogok rámenni, de csak akkor amikor a frontpáncélt és a hátsó páncélt hangolom hozzá. Az egyébként nedves festék műgyanta kombinációba pigmenteket szórtam ecsetről száradás előtt, ezzel adva meg az alap színeket.





In the brake time I made the dark streaking as well. I used Winsor&Newton raw umber, I think. Honestly the tube is so dirty that I can not read anymore the text on side. All I know it's a really dark brown color.

A sár száradási ideje alatt megcsináltam a sötét megfolyásokat. Ehhez Winsor&Newton olajfestéket használtam, azt hiszem raw umber színt. De a tubus már annyira festékes, hogy nem tudom leolvasni milyen szín. Mély barna, már már feketés 





On the weekend I start to paint the light colours (streaking on it) and finish the track and the back of the vehicle. After that I only need one more weekend and I will be ready. I hope! Fingers crossed!

A hétvégén terveim szerint befejezem a világos megfolyásokat, utána már csak egy hétvége és elkészül a sár a fenekén és az orrán, utána már csak egy hétvége és készen is lehetek! Remélem!


Thanks for watching

Regards
Gergo